MHC Twin Lift Hydraulic
THMH & THMH+
sfPORTEQ Mobile Harbor Spreaders are designed to serve the high demands on robustness and versatility required of its application. It is designed to handle containers sized from 20 to 45 as well as 2 x 20 feet with ISO twistlocks. The mobile harbor crane spreader is electric hydraulic, based on proven technology to give the spreader the required strength and endurance for the continuous operation typical of this application. Throughout the design special attention has been given to keep availability at a maximum and maintenance as simple as possible.
Key features
- High lifting capacity
- Low tare weight
- Low power consumption for a hydraulic unit
- Open access to service points
- Vulnerable parts protected by the structure
- Twistlock system without mechanical adjustment requirements
- Twistlock system without sensor adjustment requirements
- Service cage
- Long gravity point adjustment
| Technical comparison | THMH | THMH+ |
|---|---|---|
| Lifting capacity in accordance with EN 13001 evenly loaded | 45 T | 45 T |
| < 10 % eccentric | 45 T | 45 T |
| Evenly loaded Twin lift | 2 x 32.5 T | 2 x 32.5 T |
| Tare weight | 9.1 T | 9.8 T |
| Twistlock rotation time | < 1 s | < 1 s |
| Telescopic time 20 to 40 ft | 22 s | 22 s |
| Telescopic time 20 to 45 ft | N/A | 27 s |
| Flipper time for 180 deg | 4-6 s | 4-6 s |
| Flipper torque | 5500 Nm | 5500 Nm |
| Power consumption | < 7.5 kW | < 7.5 kW |
| Main voltage | Default 400 VAC or per request | Default 400 VAC or per request |
| Main voltage frequency | 50 Hz or per request | 50 Hz or per request |
| Control voltage | - | - |
| Internal | Default 24 VDC | Default 24 VDC |
| Crane interface | Per request | Per request |